Bath grab bars – Safety requirements for bathrooms
Posted by admin on February 15, 2010 under Glass Clamps Articles | 
Comments are off for this article
Together with disabilities and the elderly, families with young children, and even a pregnant woman will receive a further increase safety on the road to safely shut down and leave a bathtub or shower area. We all know that slip and fall on a wet surface bathroom is not fun and can be dangerous.
The first point is to make sure we have the right to bar. Is that this is a moist environment, more stainless steel bars, but there are other decisions, such as moisture-resistant powder coatingPaint, brass and even different forms, which is not quite over traditional institutional bend stainless steel, stainless steel, but is functional and clean well.
ADA (American Disabilities Act) bars conforming, are the only ones to use and are widely available and relatively easy to install, whether the entries without connections to ensure proper installation. If installed properly, they will be evaluated in a 500 kg resist.. Drag
Most bars are available in various lengths of 12-48 inches, even for those who are standing, and even those that are made especially if you have an unusual or special circumstances for the installation. A diameter of 1 1 / 2 (commercial) and the distance 1 1 / 4 "with 1 1 / 2 inches between the bar and the surface. The 1 1 / 4 inch diameter is sufficient for residential purposes.
Some safety bars can be folded in relation, particularly those designed for use in toilets, allowing an 'sfor both, depending on who does not need the bar or, and there are smaller, temporary installations, terminal on the side of a bathtub with auxiliary input and output.
The most important rule to follow in case of permanent installation is that the bar to catch the safety of a wooden wall studs or a pre-made must be attached to the inner wall unit 2 x 6 or 8 wedges common wall or Molly bolts are not acceptable and can only be a problem and / or, worse, an accident later.
After allI know there is an anchor to the wall meets the standards of installation and means Toggle Personally I was never one of those, but they are to mount Grab Bars if pin is on the wall in a location acceptable deposit required. This is the opportunity to examine, if necessary, but the best way possible, you should use the tunnel as the first choice.
Many bars are installed in a corner to play with the galleries, as well as horizontal and vertical, and alsoVersatility is the user.
If you are in a state of transformation, and remove the old tub or shower, and the walls are open so that the time would have been in the past, planning 8 or 2×6 blocking between the studs for exact location of the bars later very little in advance the placement of a suitable safety system when completing the project to do. Pay attention to measures of a note only to then find the blocks for easy installation.
Many repair andSpecial items are now available to us, as with little direction and the right tool, you can also do the job yourself ..
Related posts:
- Bath Handles – Security for the bathroom
- Bathroom Sinks
- How to install recessed halogen lights
- Tiling Walls
- A barrel is quite simple